英语翻译请翻译一下下面的说明书,这是一个比色仪的英文说明书.1.fill the cuvet with 10ml of unreacted sample up to the mark and replace the cap .2.place the cuvet into the holder and ensure that the notch on the cap is positioned securely into the groove .3.Press ZERO and “sip” will appear on the display.4.Wait for a few seconds and the display will show “-0.0-”.Now the meter is zeroed and ready for measurement.5.remove the cuvet.6.add the content of one packet of HL 93701 DPD reage

英语翻译
请翻译一下下面的说明书,这是一个比色仪的英文说明书.
1.fill the cuvet with 10ml of unreacted sample up to the mark and replace the cap .
2.place the cuvet into the holder and ensure that the notch on the cap is positioned securely into the groove .
3.Press ZERO and “sip” will appear on the display.
4.Wait for a few seconds and the display will show “-0.0-”.Now the meter is zeroed and ready for measurement.
5.remove the cuvet.
6.add the content of one packet of HL 93701 DPD reagent.Replace the cap and shake gently for 20 seconds(or 2 minutes in case of seawater analysis).
7.replace the cuvet into the holder and ensure that the notch on the cap is positioned securely into the groove.
8.wait for 1 minute and press READ DIRECT.The display will show “SIP” during measurements.
9.the instrument directly displays concentration in MG/L of free chlorine on the Liquid crystal Display.
10.to an empty cuvet add 3drops of HI 93701A-F DPDI indicator,3 drops of HI 93701B-F DPDI buffer.Swirl gently to mix and immediately add 10ml of unreacted sample.
11.replace the cap and shake gently again.
12.reinsert the cuvet into the instrument.
13.wait for 1 minute and the press READ DIRECT .The display will show “SIP”during measurements.
14.the insrtument directly displays cincentration in MG/L of free chlorine on the Liquid crystal Display.
最好不是翻译软件的.
翻译好的话追加分!