英语翻译note:1.material polished 0.6mm/0.24 in.thick 300 series stainless steel.2.specification #70-303(U.L TEST FOR SHARP EDGES)SHALL APPLY .3.the geometry and surfaces shown in this drawing are merely a two dimensional (2d) representation of the part.actual geometry and surfaces are accurately represented in the 3d part computer file.all reference(ref.) and non-dimensioned geometry and surfaces can only be created using the 3d part computer file.only di
英语翻译
note:
1.material polished 0.6mm/0.24 in.thick 300 series stainless steel.
2.specification #70-303(U.L TEST FOR SHARP EDGES)SHALL APPLY .
3.the geometry and surfaces shown in this drawing are merely a two dimensional (2d) representation of the part.actual geometry and surfaces are accurately represented in the 3d part computer file.all reference(ref.) and non-dimensioned geometry and surfaces can only be created using the 3d part computer file.only dimensions shown that are not reference may be used to create the part.dimensions are mm/inch.
unless otherwise specified
1.do not scale drawing.
2.remove all burrs & sharp corners.
3.dimensions:decimal inches
millimeters
4.tolerance on dimensions.inches millimeter
THREE PLACE DECIMAL
TWO PLACE DECIMA
HOLES ON CENTERLINES WITHIN
ALLOWABLE ECCENTRICITY
ANGULAR
1.材料抛光0.6mm/0.24 in.thick 300系列不锈钢。
2.规格编号70-303 （ UL认证测试锋利） ，应适用。
3.。几何形状和表面显示，在这方面制定只是二维（二维）代表该part.actual几何形状和表面准确地代表在三维的一部分，电脑file.all参考（见）和非三维几何形状和表面能只有建立使用三维零件的电脑file.only尺寸显示，没有可参考用来建立part.dimensions是毫米/英寸。除非另有说明
1.没有规模绘图。
2.移除所有毛刺及尖锐的角落。
3.尺寸：小数英寸毫米
4.宽容对尺寸。英寸3毫米的地方，小数点后二位decima的洞穴centerlines内所允许的偏心角
1.材料抛光0.6mm/0.24 in.thick 300系列不锈钢.2.规格编号70-303 （ UL认证测试锋利） ,可以适用.三,几何形状和表面显示,在这方面制定代表该部分只是二维（2D）.实际上几何形状和表面准确地代表在三维的一部分,电脑...