英语翻译选中程序后,系统先对程序进行检查,如有语法错误,则有相应的错误提示.按[ESC]键中止自动切割方式.需对此程序进行改正后再选.如果无语法错误,则系统全自动在屏幕上画出此程序的加工轨迹图形.如果程序含有G41/G42指令,则系统将编程轨迹和加上半径补偿后的轨迹一并显示出来.
问题描述：
英语翻译
选中程序后,系统先对程序进行检查,如有语法错误,则有相应的错误提
示.按[ESC]键中止自动切割方式.需对此程序进行改正后再选.
如果无语法错误,则系统全自动在屏幕上画出此程序的加工轨迹图形.如果
程序含有G41/G42指令,则系统将编程轨迹和加上半径补偿后的轨迹一并显示出
来.
答
Selected procedures,the first system of inspection procedures,if grammatical mistakes,there were errors in the corresponding
Show.By [ESC] button automatically suspend cutting.Take corrective procedures after this election.
If there is no grammatical mistakes,the system fully automated paint on the screen this trajectory graphics processing procedures.If
G41/G42 procedures contain instructions,the system will be programmed trajectories and the radius of the track compensation displayed together.