帮作答

帮作答
If you are (1) (interest) to know the process of making a recording,the following information gives you a better (2) (understand) of it.
For (3) (profession) recording,the process begins in the studio.Each singer,instrument,or group of instruments is (4) (link) to a microphone.Each microphone is plugged into one of up to 72 channels on a mixer or (5) (mix) desk.
The mixing desk (6) (allowance) the studio engineer to adjust the recording to an appropriate level for each channel.The output from each channel is fed to a track on a multitrack tape (7) (record).After the music has been recorded on the multitrack,it is mastered down.This means that it is fed back through the mixer to adjust the levels of singers and instruments in (8) (relate) to each other.At this time,effects can be used to change the sound.One of the most (9) (commonly) is echo which can make the music sound as if it was recorded in a very large building or a very small room.
The (10) (edit) sound is recorded on a two-track mastering machine to produce a master tape.The master is then used to make records,cassettes,CDs or MDs.