warning the high memory area is not available怎么解决

您好Warning:Windows did not finish loading on the previous attempt.Choose Safe mode,to start Windows with a minimal set of drivers 警告：Windows在刚才尝试后不能够完成加载,选择安全模式,用最小驱动启动你的电脑\x0dWarning:Windows multi-boot may not function correctly\x0dCheck for system files in your root directory with conflicting extensions 警告：Windows不能够正确完成多系统启动,在你的ROOT目录里检查不一致的系统文件\x0dWarning:the system configuration manager failed to run.Some of your real-mode device drivers may not initialize properly 警告：系统管理器运行失败,一些实模式驱动可能没有正确初始化\x0dThe BUFFERS setting(s) in your CONFIG.SYS file are too large.Default buffer settings will be used instead 在你的CONFIG.SYS里BUFFER设置太大.默认的BUFFER缓冲器设置将被使用\x0dA memory allocation error occurred during startup\x0d>Restart your computer and select Interactive Start to identify the problem 在启动过程中内存分配发生错误,请重新启动你的计算机然后选用交互式方式启动来确定故障原因\x0dWarning:the high memory area (HMA) is not available Additional low memory (below 640K) will be used instead 警告：高端内存不可用,低端内存将被代替使用\x0dThere is not enough memory for Windows.Remove some drivers from your CONFIG.SYS file,and then try again 对Windows来说没有足够的内存,请从CONFIG.SYS文件中移去部分加载的程序,然后再试着启动你的读入计算机\x0dYour previous MS-DOS files were not found.旧的MS-DOS文件没有找到,这常见于使用双启动的系统,另一个系统是DOS6\x0dYour previous MS-DOS version is not supported.MS-DOS startup failed 旧的MS-DOS版本不支持.MS-DOS启动失败\x0dNow loading your previous version of MS-DOS,please wait 现在正在加载旧的MS-DOS版本,请等待\x0dInvalid setting in the MSDOS.SYS file:An internal stack overflow has caused this session to be halted MSDOS.SYS 文件中无效的设置选项,系统堆栈溢出,系统挂起\x0dChange the STACKS setting in your CONFIG.SYS file,and then try again 请改变CONFIG.SYS文件中的STACK设置,然后再试\x0dStack overflow 堆栈溢出\x0dInteger divide by 0 整数被0除\x0dNot enough space for environment 没有足够的空间\x0dRun-time error 运行错误\x0dFloating-point support not loaded 浮点运算支持没有装入\x0dNull pointer assignment 无效的断点分配