英语翻译在模具仓库与机器之间的通道上有一个吸料管道造成的障碍 由于没有参照物 在每次运输时为了安全都不得不把模具吊得很高 此装置用磁铁吸附在模具最低点 利用墙上的参照物可以使模具升高到理想高度 以提高工作效率及减少耗能 由于所用材料限制 在距离参照物10米的距离会 产生5厘米之内的误差 但经过多次测试和改良可确保使用安全
英语翻译
在模具仓库与机器之间的通道上有一个吸料管道造成的障碍 由于没有参照物 在每次运输时为了安全都不得不把模具吊得很高 此装置用磁铁吸附在模具最低点 利用墙上的参照物可以使模具升高到理想高度 以提高工作效率及减少耗能 由于所用材料限制 在距离参照物10米的距离会 产生5厘米之内的误差 但经过多次测试和改良可确保使用安全
In between the mould warehouse and machine on channels with a suction pipe caused by obstacles in the absence of reference in each transport to safety had to die hanging very high the device with magnet adsorption in low utilization of mold wall reference mold may be increased to the ideal height to improve work efficiency and reduce energy consumption because of the limit of material at a distance of 10 meters of the reference distance will produce error within 5 cm but after repeated testing and improvement can be used to ensure safety
A suction pipeline poses an obstacle between mould warehouse and machines.For the lack of object of reference, the moulds have to be hoisted very high for safety reasons.
In the mold on the passage between the machine and there is a warehouse of absorb pipelines caused by the disorder because there is no reference at every time of transportation for safety has to lift the mould very high this device with magnet adsorption at low mold wall reference can be used to make mold rise to ideal height in order to improve the work efficiency and reduce energy consumption due to the materials restrictions from the reference within 10 meters distance can produce 5 centimeters of error but after many tests and improvement to ensure use safety
In the mold of the channel between the warehouse and the machine has a suction pipe obstacles caused by the absence of reference for each transportation security had to break the mold with this device very high hanging magnets use the lowest point in the mold wall the reference can be elevated to the desired height of the mold in order to improve efficiency and reduce energy consumption because the material used is limited to 10 meters distance from the reference will generate an error within 5 cm but after several tests and improved to ensure safe use
In the mold of the channel between the warehouse and the machine has a suction pipe impediments,since there is no reference,for each transport safety have had to die hanging very high,this device is used magnets lowest point in the mold,reference can make use of the mold wall rises to the desired height,to improve efficiency and reduce energy consumption,limited due to the materials used,At a distance of 10 meters from the reference is generated within the error of 5 cm,but after several tests and improved to ensure safe use.